b3 bot pomoc

Pozz  pokusavam pokrenuti b3 na cod4, mod: open warfare 2 ali mi se konstantno rusi server...dal sam negdje pogrijesio u configu?

Code: [Select]

If you want to generate a new config file and make sure the format is
 correct, you can invoke the setup procedure with the
 command : b3_run -s b3.xml

 This is B3 main config file (the one you specify when you run B3 with the
 command : b3_run -c b3.xml)

 For any change made in this config file, you have to restart the bot.
 Whenever you can specify a file/directory path, the following shortcuts
 can be used :
  @b3 : the folder where B3 code is installed in
  @conf : the folder containing this config file
 -->
<settings name="b3">
<!--
Next line: the parser defines the game:
                cod/cod2/cod4/cod5/cod6/cod7/cod8
                iourt41/iourt42
                bfbc2/bf3/moh
                etpro/altitude/oa081/smg/sof2/wop/wop15
homefront/ro2/csgo/ravaged/arma2
            (it should NOT be 'changeme')
-->
<set name="COD4">changeme</set>
<!-- Your database info: [mysql]://[db-user]:[db-password]@[db-server[:port]]/[db-name] -->
<set name="database">mysql://xxxxx:xxxxx@gamesql.xxxxxx.com/xxxxx</set>  -x radi zastite
<!-- Name of the bot -->
<set name="bot_name">b3</set>
<!-- Ingame messages are prefixed with this code, you can use colorcodes -->
<set name="bot_prefix">^0(^2b3^0)^7:</set>
<set name="time_format">%I:%M%p %Z %m/%d/%y</set>
<!-- The timezone your bot is in -->
<set name="time_zone">GMT</set>
<!-- How much detail in the b3 logfile: 9 = verbose, 10 = debug, 21 = bot, 22 = console -->
<set name="log_level">9</set>
<!-- Name of the logfile the bot will generate -->
<set name="logfile">b3.log</set>
</settings>
<settings name="server">
<!-- The RCON pass of your gameserver -->
<set name="rcon_password">xxxxxxxxx</set>  -ista stvar
<!-- The port the server is running on -->
<set name="port">28xxx</set>
<!-- The gameserver generates a logfile, put the path and name here (very important !) -->
<set name="game_log">/home/cod4_xxxxx/mods/ow2_1_45/xxxxxx_mp.log</set>
<!-- If you want to run b3 on a different computer than where your server reside (remote access to the gamelog), you can connect via ftp or http by using the following syntax:
<set name="game_log">http://serverhost/path/to/games_mp.log</set>
<set name="game_log">http://serverhost/path/to/games_mp.log</set>
Note: you can protect your http access with a .htaccess, b3 can authenticate itself.
-->
<!-- The public IP your gameserver is residing on -->
<set name="public_ip">1xx.xx.xxx.xx</set>
<!-- The IP the bot can use to send RCON commands to (127.0.0.1 when on the same box) -->
<set name="rcon_ip">1xx.xx.xxx.xx</set>
<!-- Is the gameserver running PunkBuster Anticheat: on/off -->
<set name="punkbuster">off</set>
<!-- Delay between each log reading. Set a higher value to consume less disk ressources or bandwidth if you remotely connect (ftp or http remote log access) -->
<set name="delay">0.33</set>
<!-- Number of lines to process per second. Set a lower value to consume less CPU ressources -->
<set name="lines_per_second">50</set>
</settings>
<settings name="autodoc">
<!-- Autodoc will generate a user documentation for all B3 commands
* type : can be one of : html, htmltable, xml
* maxlevel : if you want to exclude commands reserved for higher levels
* destination : can be a file or a ftp url
by default, a html documentation is created in your conf folder
-->
<set name="type">html</set>
<set name="maxlevel">100</set>
<!-- <set name="destination"> /Home/cod4_xxxxxx/b3bot_xxxxxxx/b3/conf test_doc.htm</set> -->
<!-- <set name="destination">ftp://user:pass@somewhere.com/www/test_doc.htm</set> -->
</settings>
    <settings name="update">
        <!-- B3 checks if a new version is available at startup. Choose here what channel you want to check against.
            Available channels are :
                stable : will only show stable releases of B3
                beta : will also check if a beta release is available
                dev : will also check if a development release is available
            If you don't know what channel to use, use 'stable'
        -->
        <set name="channel">stable</set>
    </settings>
<settings name="messages">
<set name="kicked_by">$clientname^7 was kicked by $adminname^7 $reason</set>
<set name="kicked">$clientname^7 was kicked $reason</set>
<set name="banned_by">$clientname^7 was banned by $adminname^7 $reason</set>
<set name="banned">$clientname^7 was banned $reason</set>
<set name="temp_banned_by">$clientname^7 was temp banned by $adminname^7 for $banduration^7 $reason</set>
<set name="temp_banned">$clientname^7 was temp banned for $banduration^7 $reason</set>
<set name="unbanned_by">$clientname^7 was un-banned by $adminname^7 $reason</set>
<set name="unbanned">$clientname^7 was un-banned $reason</set>
</settings>
<settings name="plugins">
<set name="external_dir">@b3/extplugins</set>
</settings>
<plugins>
<!-- Define here the plugins you want to load.
           
            Plugin order is important. Plugins that add new in-game commands all
depend on the admin plugin. Make sure to have the admin plugin before
them.
           
            You can load a plugin but having it diabled by default. This
            allows to later enabled it ingame with the !enable command. To do so use
            the following syntax :
                <plugin name="adv" config="@conf/plugin_adv.xml" disabled="yes"/>
           
            You can override the plugin path (official plugins and extplugins folders)
            by specifying the exact location of the plugin file with the 'path' attribute :
                <plugin name="adv" config="@conf/plugin_adv.xml" path="c:/somewhere/else/"/>
           
            -->
<plugin name="censor" config="@conf/plugin_censor.xml" />
<plugin name="spamcontrol" config="@conf/plugin_spamcontrol.xml" />
        <plugin name="admin" config="@conf/plugin_admin.xml" />
<plugin name="tk" config="@conf/plugin_tk.xml" />
<plugin name="stats" config="@conf/plugin_stats.xml" />
<plugin name="pingwatch" config="@conf/plugin_pingwatch.xml" />
<plugin name="adv" config="@conf/plugin_adv.xml" />
<plugin name="status" config="@conf/plugin_status.xml" />
<plugin name="welcome" config="@conf/plugin_welcome.xml" />
<plugin name="punkbuster" config="@conf/plugin_punkbuster.xml" />

<!-- The next plugins are external, 3rd party plugins and should reside in the external_dir. Example: -->
<!-- plugin config="@b3/extplugins/conf/newplugin.xml" name="newplugin" -->

<!-- You can add new/custom plugins to this list using the same form as above. -->

<!--
This is a non-standard plugin, and quite resource heavy. Please take
a look in the B3 forums (look for XLR Extensions) for more
information before enabling this. Extra database tables are
necessary.
<plugin name="xlrstats" config="@b3/extplugins/conf/xlrstats.xml"/>
-->

<!-- You can find many others plugin for B3 which can extend functionalities a lot !
Please take a look at the official website for more informations. -->
</plugins>
</configuration>
A manuadmin mi rusi server kad aktiviram jedan od killstreakova i dobivam ove greske.
PHP Fatal error:  Call to a member function setTeam() on a non-object in /home/srvxxx/cod4_xxx/adminmod_xxxxxxxx/classes/mod.class.php on line 966  i na 955  to su ove dvije linije (  $this->players[$guid]->update($pid, $name);
       $this->players[$guid]->setTeam($team))  ;.kako to da rijesim?