forum.hrvatski-hosting.com

Gameserveri => Counter Strike Source & Ostale Half Life 2 Igre => Topic started by: admin on December 29, 2009, 03:34:22 PM

Title: zBlock
Post by: admin on December 29, 2009, 03:34:22 PM

zBlock HomePage
 (http://zblock.mgamez.eu)

zBlock Download (http://zblock.mgamez.eu/files.htm)

zBlock Update Naredba

Code: [Select]

rcon zb_update
Uključivanje/Isključivanje
rcon_password YOUR_RCON_PASSWORD
rcon zb_active 0
rcon zb_active 1

Client Commands

Can be entered in your console at any time

zb_status
- Displays important server settings

zb_netinfo
- Displays clientside netsettings (rates, interpolation, prediction, lag compensation)

zb_version
- Displays version of zBlock currently installed on the server

zb_help
- Displays information about available zBlock commands

zb_readylist
- Counter-Strike: Source Only
- Displays ready and not-ready players when using the ready-up system.

zb_players
- Displays a list of players authenticated by a configured auth-host (zb_authhost)

zb_warnings
- Displays information regarding questionable server configuration.

zb_teamcash
- Counter-Strike: Source Only
- Displays the team money situation (We recommend your caller binds this command to a key).
- i.e. bind "F1" "zb_teamcash"
- Note: Only usable during freeze-time and when "zb_allowcashcalling" is enabled.


Server Commands

Must be executed through RCON or directly at the server

zb_lo3
- Executes config defined in "zb_matchconfig"
- Restarts the round 3 times
- Returning startmoney to value set in "zb_startmoney" (Default 800)

zb_ko3
- Restarts the round 3 times, declaring a knife-round

zb_readyup
- Counter-Strike Source Only
- Use zb_readyup to start, or stop the readyup sequence
- Accepts "1" or "0" as parameter, "1" enabling readyup, "0" disabling readyup
- Allows all players to set themselves as ready
- When all players are ready, zb_lo3 is triggered

zb_players
- A mirrored server-side command of the "zb_players" client console command.

zb_update
- Manually checks for an update to the plugin.
- Once an update is found you will be notified, calling this command again will download the update.


Server CVARS (Settings)

Must be executed through RCON or directly at the server

zb_matchconfig (Default: None)
- Match config to be executed before initiating the live on 3 sequence
- Note: To reset this value using rcon use: rcon zb_matchconfig " "

zb_readyup_max (Default: 10)
- Counter-Strike Source Only
- The minimum number of players required to be ready to initiate live-on-three

zb_startmoney (Default: 800)
- Counter-Strike Source Only
- The amount that the starting money should be returned to after the live on 3 sequence is completed
-  Note:This is to prevent players from regaining full money by using "retry" in the second round of overtime

zb_authhost (Default: NONE)
- Configures the auth-host to use with zBlock.
- Changing this setting will re-authenticate all existing players in the server and continue to authenticate new players who join.
(Please see our article on "Player Authentication" at our website for more details and a list of auth-hosts).
- Note: To reset this value using rcon use: rcon zb_authhost " " OR rcon zb_authhost NONE

zb_autoupdate (Default: 1)
- Enable/Disable zBlock plugin auto-updating.
- Note: Updates can be downloaded manually using the server command "zb_update"
- Note: Automatic updates are never downloaded whilst players are connected to the server.

zb_allowcashcalling (Default: 1)
- Counter-Strike: Source Only
- Enable/Disable Team money calling with "zb_teamcash"

zb_doorfix (Default: 1)
- Counter-Strike: Source Only
- Enable/Disable the zBlock door fix for high tickrate servers.
- Note: Please remove any map fix files you were previously using if running your server with this enabled.
- Setting the value to 1 will lock phys_timescale to 1.0

zb_dosprotect (Default: 1)
- Enable/Disable Denial-Of-Service protection from a recently released server attack program.
- Note: Once VALVe issues a fix for this issue please set this to "0" in your server.cfg

zb_crouchfix (Default: 1)
- Enable/Disable the fix for the crouch-bug issue.
- Note: 0 = Default crouching behaviour / 1 = Crouch-Fix enabled

zb_bunnyfix (Default: 1)
- Enable/Disable the bunny-hop fix.
- Note: 0 = Default bunny-hopping behaviour / 1 = Disable bunny-hopping

Title: Re: zBlock
Post by: a1m on February 02, 2011, 07:06:20 PM

zasto meni ovo nece na non staem verziji :/ ?

Title: Re: zBlock
Post by: marin550 on February 04, 2011, 01:56:59 PM

zato što verzija 4.5 ne radi na hl2 enginu već samo na orangebox enginu (steam)